[BLDG-SIM] Simulating Radiant Cooling
Zhen Tian
tianzhen9 at yahoo.com
Tue Oct 2 09:24:14 PDT 2007
Hi, Jeremy,
I would suggest you to simulate radiant cooling in eQUEST by using fan-coil system. You need to remove the fan energy use in the fan coil unit. Additional make-up system is needed for ventilation. The pump head needed to be adjust to mimic the pump energy use increase in radiant cooling.
Regards,
David Tian
Jeremy Plitt <jeremy.plitt at setty.com> wrote:
st1\:*{behavior:url(#default#ieooui) } Hello everyone,
I¡¯m attempting to model radiant cooling with eQuest 3-6. You cannot actually model it in eQuest (to my knowledge) so I¡¯m trying to ¡°trick¡± the program.
First, I¡¯m simulating a VAV system with a chilled water loop for cooling and then obtain the cooling load on the chiller. Second, I simulate a VAV system with only outside air ventilation to meet code. There are exhaust fans in each room to replace the return fan which I removed. From the second simulation I obtain the cooling load on the chiller which is from the cooling of the outside air. Third, I subtract the first model¡¯s chiller cooling load by the second model¡¯s chiller cooling load to obtain what would be the cooling load taken up by radiant ceiling cooling panels.
In theory, the radiant cooling panels¡¯ load would be much larger than the outside air cooling load. However, my calculations are telling me that the outdoor air load is larger than the radiant cooling panels¡¯ load. Also, in the second simulation, I have reduced the amount of supply air by 80% because only outdoor air is being supplied to the building. Therefore, my fan power consumption should decrease by 80% as well. My results tell me however that the fans¡¯ energy consumption has only decreased by 10%.
Would anyone know of a reason why my results don¡¯t make any sense?? The majority of my inputs for the two simulations are the same except for where it is necessary to vary them.
Thanks,
Jeremy Plitt
Mechanical Engineer
Setty & Associates, Ltd.
3040 Williams Drive Suite 600
Fairfax, VA 22031-4618
PH: 703-691-2115 Ext. 123
FX: 703-691-8084
=====================================================You received this e-mail because you are subscribed to the BLDG-SIM at GARD.COM mailing list. To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE at GARD.COM
---------------------------------
Need a vacation? Get great deals to amazing places on Yahoo! Travel.
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20071002/29f92ea5/attachment.htm>
More information about the Bldg-sim
mailing list