[BLDG-SIM] USER DEFINED UTILITY RATES
Mahabir Bhandari
bhandari at ecs.umass.edu
Tue Dec 9 14:51:50 PST 2003
Mark,
I presume that you are using eQuest. Somehow your files are
showing .txt as an extension. i.e the files look like
Elec.GRT.TXT. If you change this file to Elec.GRT it should
work. Attached are the files with right extension and you
can see the files on Wizard screen 1.
Mahabir
Mahabir Bhandari,
Research Fellow
CEERE
Department of Mechanical and Industrial Engineering
University of Massachusetts
Amherst, MA 01003-2210
TEL: (413) 577-4726
FAX: (413) 545-1027
email: bhandari at ecs.umass.edu
I have written following simple utility rate files in BDL
syntax and structure stated in "DOE2-BDL Utility Rate
Documentation". The files are not showing up in Wizard
Screen 1 Electric or Gas Utility Rate pick lists when "file"
is selected. Does anyone have any suggestions?
<<ELEC.ert.txt>> <<GAS.grt.txt>>
Mark Zoeteman
FTC&H
(616) 464-3739
mrzoeteman at ftch.com
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 10299 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20031209/d440bc3a/attachment.bin>
More information about the Bldg-sim
mailing list