[Virtual-sim] Question about the LEED requirement

Ramana Koti ramana.koti at gmail.com
Fri Feb 22 08:26:53 PST 2013


What are the sky models being used in each case? When I used the simulation
option a while ago, I found LEED's 'clear sky condition' requirement not
clearly defined.

Ramana.

On Fri, Feb 22, 2013 at 10:56 AM, Te Qi <gtqite at gmail.com> wrote:

> Dear all,
>
> I just run a daylighting simulation using IES LEED Navigator and  my room
> did not get the credit, based on curiosity, I run the same model in Ecotect
> using Radiance, then it surprised me that the result calculated from
> Radiance is far more than The result calculated from IESVE. Anyone has ever
> met this same problem before, could you explain what maybe the possible
> reason?
> Thanks in advance.
> Te
>
> _______________________________________________
> Virtual-sim mailing list
> Virtual-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/virtual-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> VIRTUAL-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/virtual-sim-onebuilding.org/attachments/20130222/6c95f0c4/attachment-0002.htm>


More information about the Virtual-sim mailing list