<div dir="auto">Dear colleagues,<div dir="auto">When I try to save in Trnbuild, immediately I get this error.</div><div dir="auto"><br></div><div dir="auto"> I tried two variants as the Tutorials manual specified (9): the first one, introducing an input value in type56 (Houtside:64) and the second variant, introducing an equation that includes the wind speed (3.8*Windspeed+7.4).  With the two variants I obtain as the same result: That entries for this convective coefficient are not allowed as INPUT. </div><div dir="auto"><p dir="ltr">Also, I did what the Tutorial says, put in the front wall: internal calculation/vertical wall and the back wall: user-defined: Houtside.</p><p dir="ltr">What's the solution?</p><p dir="ltr">Best regards,</p><p dir="ltr">Ricardo </p></div></div>