<div dir="ltr">Hi,<br>Sorry, I forgot to mention one thing. <div><br></div><div>I am following the attached paper and trying to set up the system they present. I use the same components they use but I am not getting the same results. </div><div><br></div><div>Sorry for the repetitive emails but I am extremely desperate to solve this issue and get my system running. Will it be possible to discuss this problem over a Zoom call? </div><div><br></div><div>Thanks in advance,</div><div>Hadi</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 11, 2023 at 12:32 AM Hadi Tannous <<a href="mailto:hadieliastannous@gmail.com">hadieliastannous@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Hi Jeff,<div><br></div><div>Thanks for your quick responses. My deadline is approaching and I have been stuck on this for days.</div><div><br></div><div>I plotted the flow rate and temperature in and out of the tank with the heating elements off, as attached. The flow rate in and out of the tank is balanced (all at 60kg/hr). It also seems the PVT is having an effect on the temperature in the tank. </div><div><img src="cid:ii_lgbggyx80" alt="image.png" width="482" height="239"><br></div><div><br></div><div><img src="cid:ii_lgbgiayd1" alt="image.png" width="482" height="248"><br></div><div><br></div><div>I tried another period in April when the PVT achieved a temperature higher than 40 C, but as you see, the tank is providing the temperature to the load at a lower temperature when the heating elements are still off.</div><div><img src="cid:ii_lgbgp1x72" alt="image.png" width="482" height="236"><br></div><div><br></div><div>When heating elements are on, the tank provides a temperature of 40 C to the load, as seen below.</div><div><img src="cid:ii_lgbgsv913" alt="image.png" width="482" height="245"><br></div><div><br></div><div>It is also weird that at some moments, the temperature from the tank to the PVT (blue) is higher than the temperature from the PVT to the tank (red).</div><div>Any thoughts?</div><div><br></div><div>Thanks,</div><div>Hadi</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Apr 10, 2023 at 10:20 PM <<a href="mailto:thornton@tess-inc.com" target="_blank">thornton@tess-inc.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 2023-04-10 16:14, Hadi Tannous wrote:<br>
<br>
> Thanks for the response. I am not sure how to monitor if the solar<br>
> system is supplying any energy to the tank. I tried to increase the<br>
> size of the PVT and monitor the average temperature of the tank<br>
> (heating elements off). It does not seem to have much effect as you<br>
> can see.<br>
<br>
One plot per year doesn't tell you much - try plotting weekly.  Then <br>
simply plot the flow rate of the solar system into the storage tank to <br>
see if it's doing anything.<br>
<br>
Jeff<br>
<br>
<br>
----<br>
Jeff Thornton<br>
President<br>
Thermal Energy System Specialists (TESS)<br>
3 N. Pinckney Street - Suite 202<br>
Madison WI 53703<br>
(608) 274-2577<br>
<a href="http://www.tess-inc.com" rel="noreferrer" target="_blank">www.tess-inc.com</a><br>
</blockquote></div>
</blockquote></div>