<div dir="ltr">Dear All,<div>I am trying to run genopt with TRNSYS 17. I am trying to run a GenOpt-Type56 example but when I try to run it, I cannot. I followed all the steps as described in the manual GenOpt-Type56.</div><div><br></div><div>I have installed genopt 2.1.0. </div><div>There is TRNOPT installed in trnsys as Optimization library, TESS. There is JAVA 8 (build 1.8.0_351-b10) installed as well. </div><div>I can run the trnsys from simulation studio but I cannot launch "StartOptimisation.bat"from the explorer or other web browser. I also tried to run, "genopt.ini" from WinGenOpt but it shows the following error:</div><div><img src="cid:ii_le5tboyw0" alt="image.png" width="463" height="92"><br></div><div>After this i tried to follow the troubleshoot given in "USING GENOPT WITH TRNSYS 16 AND TYPE 56", and tried to follow the given solutions but i cannot still run the example.</div><div> </div><div>It would be a great help if anyone can help me with running the example GenOpt-Type56.</div><div>Thank you in advance.</div><div><br></div><div>Regards,</div><div>Ashmin Aryal</div><div><br></div></div>