<div dir="ltr">Hello Trnsys-Colleagues,<div><br><div>There is a problem with my HVAC modeling, so I ask for your help.</div><div><br>Trnflow's Test Data supplies and ventilates the building, and the air volume is given to Simulation Studio's Calculation.<br>The simulation does not stop if I give one air volume value(constant air volume), but if I give the air volume with the variable air volume, the simulation stops and the following error occurs: <br><br> ***** ***** WARNING ***** UNIT 32 TYPE 56, TIME =   1.000E+00<br> COMIS MESSAGE  ***** ERROR *****   <br> Flow matrix is singular ! This might be caused by a zone that has no<br> ventilation at all in this condition.<br> Age of air and air change efficiency output is invalid !</div><div><br></div><div><img src="cid:ii_ldinf7un1" alt="image.png" width="542" height="241"><br><div>This is Calculation for air flow rate. I want to give 30% of the maximum air volume when it is below 23 degrees, give a linear air volume between 23 degrees and 25, and give a maximum air volume when it exceeds 25 degrees.</div>The signal below is that gives air volume in Trnflow's Test Data.</div><div><img src="cid:ii_ldinkk222" alt="image.png" width="542" height="503"><br></div><img src="cid:ii_ldinkm8x3" alt="image.png" width="329" height="542"></div><div><img src="cid:ii_ldinlhsy4" alt="image.png" width="542" height="470"><br><div><img src="cid:ii_ldinmpbt5" alt="image.png" width="542" height="468"></div><div><br></div><div>Any help would be appreciated.</div><div><br></div><div>Thanks and have a nice day!</div><div><br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div style="color:rgb(34,34,34)"><span style="font-family:Dotum,sans-serif;font-size:12px">------------------------------</span><span style="font-family:Dotum,sans-serif;font-size:12px">------------------------------</span><span style="font-family:Dotum,sans-serif;font-size:12px">------------------------------</span><span style="font-family:Dotum,sans-serif;font-size:12px">-</span><br>Lee Hye-In<br><font face="arial, sans-serif"><br>Graduate school of Yeungnam University</font></div><div style="color:rgb(34,34,34)"><font face="arial, sans-serif">Dept. of Architectural Engineering</font><font face="arial, sans-serif"><br>Building Energy Systems Laboratory<br>280 Daehak-ro, Gyeongsan-si, Gyeongbuk-do 38541, Korea<br>(Tel) +82-53-810-3543; +82-10-8330-7087</font><br><a href="mailto:gpdls0101@gmail.com" style="color:rgb(17,85,204)" target="_blank">gpdls0101@gmail.com</a></div></div></div></div></div></div>