<div dir="ltr">Dear Trnsys community,<div><br></div><div>I want to simulate the stack effect in a high room with high thermal gain.</div><div><br></div><div>For this, I have 1 zone and 5 thermal air nodes in the z direction to get the temperature at several heights.  <br clear="all"><div><img src="cid:ii_lcum6bi53" alt="image.png" width="243" height="480"><br></div><div>How can I do this and avoid that TRNSYS see ceiling between the zone ? Do I need to delete the horizontal surface for zone 2-3-4 ? Or do I put mass less horizontal surface ?</div><div><br></div><div>As Well, how do I do the cross flow ventilation ? Do I use the couple mass flow between zones ?</div><div><img src="cid:ii_lcum4i152" alt="image.png" width="542" height="323"><br></div><div><br></div><div> or I put a coupling air flow (same that natural ventilation mass flow) for the horizontal surface ?</div><div><img src="cid:ii_lcum3cti1" alt="image.png" width="503" height="137"><br></div><div><br></div><div>Thanks a lot. </div><div><br></div><div>Best regards,</div><div><br></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><font style="font-size:12.8px" color="#000000"><b>Dr. Loïc Tachon </b></font><div style="font-size:12.8px"><div><font color="#000000">(+33) 6 7440-0536 (France)</font></div><div><br></div></div><div><font color="#e69138"><b><br></b></font></div></div></div></div></div>