<div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr">Dear all TRNSYS users,<br><div><br></div><div>I am modeling a forced air furnace system to satisfy heating demands of a residential building. To<span style="color:rgb(77,81,86);font-family:arial,sans-serif"> simulate the building's thermal load and consider the effects of air transfer between thermal zones, I've used Type 56-TRNFlow.</span><span style="color:rgb(77,81,86);font-family:arial,sans-serif;font-size:14px"> As you know, when</span> TRNFLOW is turned on, in the 
simulation the defined infiltrations, ventilations and couplings will be replaced with the defined TRNFLOW data. Thus, in TRNFlow, I must define a fan, a heating coil, and a ducting system in order to model the forced air furnace system.</div><div><br></div><div>However, I am having some trouble modeling a fan and fittings (Tee).</div><div><br></div><div>1- In TRNFlow, how can I control the value of a fan's air flow rate? My goal is to have the air blown into the building by a supply fan at a constant and certain rate. It seems that due to changes in pressure differences between auxiliary nodes, the air flow rate of the fan cannot remain constant either.<br></div><div><br></div><div>2- How can I input the value of the flow rate of a "straight duct" in TRNFlow? It seems that I can only input the values of the friction loss and the dynamic loss.</div><div><br></div><div>3- How can I model a diverging tee or a converging tee as an air link in TRNFlow. For example, as for diverging tee, if I want to send 30% of the flow rate in the main duct to the first branch and the rest to the second branch, how can I do this?</div><div><br></div><div>I would appreciate it if anyone helps me in these cases.</div><div><br></div><div>Best,</div><div>Ali</div><div><br></div></div></div></div></div></div></div></div></div>