<div dir="auto">Dear TRNSYS users,<div dir="auto"><br></div><div dir="auto">I have a very specific question about what TRNSYS does "under the hood".</div><div dir="auto"><br></div><div dir="auto">I know that in the "successive substitution" method, the outputs of each Type are computed in the same order that the Types have in the input file. The outputs are then imposed as inputs depending on the connections defined by the user, and the same process is carried out several times until convergence is achieved.</div><div dir="auto"><br></div><div dir="auto">My question is: when the outputs of a certain Type have been computed, the inputs of the Types that are lower in the list are updated immediately?? Or are the inputs of all Types updated at the same time once the outputs of all Types have been computed??</div><div dir="auto"><br></div><div dir="auto">I hope that you understand my question. It was a little hard to explain, because it is a very specific topic.</div><div dir="auto"><br></div><div dir="auto">I would be very thankful for your answer.</div><div dir="auto"><br></div><div dir="auto">Kind regards,</div><div dir="auto"><br></div><div dir="auto">Adrian</div></div>