<div dir="ltr">Dear all,<div><br></div><div>I am trying to use TRNOPT for parametric/optimisation runs, but when I run the simulation (after setting all the settings up as shown in the documentation relative to TRNOPT) I get an error message and the simulation stops before even starting. The error is shown in the attached picture 1. </div><div><br></div><div>It reports that I need to specify at least one output for the surface number (-1) while this number associated with this supposed surface does not exist at all in my TRNBuild project. </div><div>Also the zone number is not specified in the error message (while there are 2 thermal zones in my project).</div><div><br></div><div>If anyone encountered this issue I would grateful to receive help</div><div><br></div><div>Best regards,</div><div>Amin</div></div><img src="https://my-email-signature.link/signature.gif?u=1061063&e=254664745&v=f4bbfc74b9e33329492668133ae0b9db51b2893dc4f0e9a74dd8119d5c932a35" alt="" width="0" height="0" style="width:2px;max-height:0;overflow:hidden">