<div dir="ltr"><div>Dear users,</div><div><br></div><div>I want to simulate a huge building (5500 m2) with a 20 cm concrete ground without isolation. </div><div>I don't really understand how the direct contact boundary condition works.</div><div><br></div><div>I made a ground wall composed of 20 cm of concret and 80 cm of calcar.</div><div><br></div><div>I realize that the simulation result (Tzone temperature) is very dependent of the ground temperature boundary condition. </div><div>I use type 77 with the depth of ground temperature of 1m, the amplitude of 12 and the mean temperature of 12.</div><div>If I change the parameters of type 77, the zone temperature results change a lots.</div><div><br></div><div>In the inf file, i get u value result of my floor : THERMAL CONDUCTANCE, U=     4.21086 kJ/h m2K; U-Wert=     0.97567 W/m2K</div><div><br></div><div>If I don't put the 80 cm of calcar, I get the following u value :</div><div>THERMAL CONDUCTANCE, U=    37.80000 kJ/h m2K; U-Wert=     3.77020 W/m2K<br></div><div><br></div><div>Is this normal ? What means U-Wert ?</div><div><br></div><div><br></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><font style="font-size:12.8px" color="#000000"><b>Dr. Loïc Tachon </b></font><div style="font-size:12.8px"><div><font color="#000000">(+33) 6 7440-0536 (France)</font></div><div><br></div></div><div><font color="#e69138"><b><br></b></font></div></div></div></div>