<div dir="ltr">Dear Users, <div><br></div><div>I am facing a problem with a TRNSYS simulation (basically a BUI file with the building's features and a .tpf file where I implemented other components, e.g., CO2 balance, ventilation system and so on). I realised that when I run the simulation directly by opening the .tpf file, the simulation works. However, when I open <i>simulation</i><i> studio</i> and import the TRNSYS Input file, and run the simulation, an error occurs in an Equation tool.</div><div><br></div><div>I tried the same with many folders, but the same happens with every simulation.</div><div><br></div><div>I cannot figure it out why and, if maybe this is "normal"...</div><div><br></div><div><br></div><div>Best Regards,</div><div><br></div><div><br></div><div><div>--<br></div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><b>Maja Danovska</b><div><b><br></b><div>Research Fellow</div><div><span style="color:rgb(34,34,34)">Dep. of Civil, Environmental and Mechanical Engineering</span><br style="color:rgb(34,34,34)"><span style="color:rgb(34,34,34)">University of Trento</span><br></div><div><span style="color:rgb(34,34,34)">via Mesiano, 77 - 38123 - Trento - ITALY</span><span style="color:rgb(34,34,34)"><br></span></div><div><span style="color:rgb(34,34,34)"><br></span></div><div><span style="color:rgb(34,34,34)"><a href="mailto:maja.danovska@unitn.it" target="_blank">maja.danovska@unitn.it</a> </span></div><div><span style="color:rgb(34,34,34)">+393403391289</span></div></div></div></div></div></div>