<div dir="auto">Dear All,<div dir="auto"><br></div><div dir="auto">I simulated both horizontal and vertical ground heat exchangers on TRNSYS, however my results especially with the horizontal configuration deviates much from my experimental data.</div><div dir="auto"><br></div><div dir="auto">I want to use GenOpt for parametric analysis in order to minimize the error. Please can anyone help to guide me through this? I have not used GenOpt  before. I don't know how it is used with TRNSYS.</div><div dir="auto"><br></div><div dir="auto">Your help is much appreciated!</div><div dir="auto"><br></div><div dir="auto">Regards,</div><div dir="auto"><br></div><div dir="auto">Fabian. </div></div>