<div dir="auto"><div style="font-family:sans-serif;font-size:12.8px" dir="auto">Dear Users,</div><div style="font-family:sans-serif;font-size:12.8px" dir="auto">I'm modeling a system where  the solar cycle is separate from the GSHP cycle, in this system If the tank temperature is within the desired range or if the control signal of the solar cycle is 1,  Diverting Valve-1 will send all of the GSHP heat to the house . If the water storage tank, collector and the building are cold simultaneously, Diverting Valve-1 will send part to house and part to tank. Diverting Valve-2 will generally send all of its input flow to house but if the house is warm enough and the tank is cold while the collector is cold too, this valve will send all of its input to tank.I have a problem when I ran the simulation.<br>2-In  this system,how can i add a passive cooling mode (3624 h- 5832 h ) borehole heat exchanger works as heat sink , where heat from house rejected directly  to  borehole.</div><div style="font-family:sans-serif;font-size:12.8px" dir="auto">I will attach my file (*.tpf* .bui*.tm2).</div><div style="font-family:sans-serif;font-size:12.8px" dir="auto">Thank you in advance ,<br>Best regards</div></div>