<div dir="ltr">Dear Users,<div><br></div><div>I have a question concerning the idf file created from Sketchup (w\ plugin Trnsys3D). <br clear="all"><div><br></div><div>I have created the geometry of a building composed of 4 thermal zones. In the meantime, I've also defined new constructions instead of using the default ones. To each surface a construction was assigned, and especially for the three adjacent walls I set ZONE as condition of Adjacency (instead of using the default name ADJACENT WALL or ADJ WALL).</div><div><br></div><div>Then I saved to idf, tried to import it in TRNbuild and I got the error "undefined wall type, Zone no. XXX and the name of the construction". </div><div><br></div><div>So, I proceeded by searching each surface in Sketchup, but it seems no errors are present. I have no idea how to fix it. </div><div><br></div><div>If necessary, I'll attach and send also the .idf file for clearness. </div><div><br></div><div>Thanks for helping,</div><div><br></div><div>BR,</div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><b>Maja Danovska</b><div><b><br></b><div>Research Fellow</div><div><span style="color:rgb(34,34,34)">Dep. of Civil, Environmental and Mechanical Engineering</span><br style="color:rgb(34,34,34)"><span style="color:rgb(34,34,34)">University of Trento</span><br></div><div><span style="color:rgb(34,34,34)">via Mesiano, 77 - 38123 - Trento - ITALY</span><span style="color:rgb(34,34,34)"><br></span></div><div><span style="color:rgb(34,34,34)"><br></span></div><div><span style="color:rgb(34,34,34)"><a href="mailto:maja.danovska@unitn.it" target="_blank">maja.danovska@unitn.it</a> </span></div><div><span style="color:rgb(34,34,34)">+393403391289</span></div></div></div></div></div></div>