<div dir="ltr">Dear all, I'm modeling on Trnsys an radiators heating system of a 3 story building from the 1980s. I'm using the Type 1231 as radiators and type 700 as Boiler. Types 1231 are connected by Type 56 as internal gain(0.8 convective; 0.2 radiative).<br>I have two questions / problems:<br><br>1) The internal rooms temperatures are below 20°C (comfort temperature) when the system is on.  I don't understend why. <br>The parameters and input are:<br>Type 700<br>-Rated Capacity  248400 kJ/hr (69kW)<br>-Minimum Turn-Down Ratio 0.51; If I understod right it is the ratio between minimum and maximum Boiler capacity. (35kW/69kW)<br>- Intel fluid tempertature: i connected this input with radietors outlet temperature trought a mixing valve (type 649);<br>- Intel fluid flowrate: like intel fuid temperature.<br>- input control signal: the system work from 14.00pm to 22.00pm<br>- set point temperature : 80 °C<br><br>Type 1231<br>I inserted 13 different Type 1231, one per appartament.<br>- Design surface temperature is 65°C<br>- Design Air temperature is 20 °C<br>- I calcolate the flowrate as (radiator capacity)/(Cpw*deltaT) deltaT=Tin-Tout=20°C, for each type 1231<br><br>2) I want to replace the boiler with a heat pump (A-W HP Type 941) but leaving the existing radiators.<br>do i have change the type 1231 parameters?<br>For example Tsd from 65°C to 50/45°C?<br><br>Thanks a lot to everyone,<br>Best regards <br>Miriam<br></div>