<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<meta name="Generator" content="Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:"Yu Gothic";
panose-1:2 11 4 0 0 0 0 0 0 0;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
@font-face
{font-family:"\@Yu Gothic";
panose-1:2 11 4 0 0 0 0 0 0 0;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0cm;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";}
p.msonormal0, li.msonormal0, div.msonormal0
{mso-style-name:msonormal;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman",serif;}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;}
span.EmailStyle21
{mso-style-type:personal;
font-family:"Times New Roman",serif;
color:windowtext;}
span.EmailStyle22
{mso-style-type:personal;
font-family:"Times New Roman",serif;
color:windowtext;}
span.EmailStyle23
{mso-style-type:personal;
font-family:"Times New Roman",serif;
color:windowtext;}
span.EmailStyle24
{mso-style-type:personal-reply;
font-family:"Times New Roman",serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 70.85pt 70.85pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang="TR" link="blue" vlink="purple">
<div class="WordSection1">
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Dear Jeff,<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">I applied the same working procedure while modeling the system. In my case I am using a split type air conditioner and it has no fresh air option (no ventilation). It
only circulates and conditions the indoor air.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Therefore, I connected the weather data both the building and heat pump. The inlet temperature of the building change by this connection. Then, I connected the inside
air temperature change to the heat pump return air under using thermostat. I also switched off the heating, cooling and ventilation options in Type 56.
<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">I thought it was a logical approach by providing “All need to be answered every time” case.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">But now I faced to apply reverse process. I will try to do this new proposed way.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Thanks in advance.<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">HG Ozcan
<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Jeff Thornton <thornton@tess-inc.com>
<br>
<b>Sent:</b> Friday, March 27, 2020 3:59 PM<br>
<b>To:</b> Hüseyin Günhan Özcan <huseyin.ozcan@yasar.edu.tr><br>
<b>Cc:</b> TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>; David BRADLEY <d.bradley@tess-inc.com>; Muhammad Zeeshan <zeeshanmuhammad922@gmail.com><br>
<b>Subject:</b> Re: [TRNSYS-users] Type 941(Air to water heat pump)<o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Huseyin,<o:p></o:p></p>
<div>
<p class="MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class="MsoNormal">You’ll need to add a ventilation stream to the building and then set the ventilation inputs (temperature, humidity, flow rate) as inputs. There are example projects and documentation on how to do that. <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class="MsoNormal">On a broader scale, remember that each component, piece of equipment etc needs to be fully connected in TRNSYS like a real piece of equipment. The trnsys connections are equivalent to pipes and wires in a real system. Where is the air
coming from, where is it going, what’s going to turn my device on and off, etc. All need to be answered every time.<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"><o:p> </o:p></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt">Jeff <o:p></o:p></p>
<div>
<p class="MsoNormal">Sent from my iPhone<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"><br>
<br>
<o:p></o:p></p>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<p class="MsoNormal" style="margin-bottom:12.0pt">On Mar 27, 2020, at 10:46 AM, Hüseyin Günhan Özcan <<a href="mailto:huseyin.ozcan@yasar.edu.tr">huseyin.ozcan@yasar.edu.tr</a>> wrote:<o:p></o:p></p>
</blockquote>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal"><span style="font-family:"Tahoma",sans-serif"></span> <o:p>
</o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">Dear Jeff,</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">No. I have just connected the room air temperature and reletive humudity outputs of Type 56 to the return air temperature and return air relative humudity inputs of Type 922c inputs.
</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">There is no opportunity for inverse relation from heat pump to building.
</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">I checked under enabling and disenabling ventilation, heating and cooling options in TRNBuild.</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">Regards.</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US">Huseyin</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<div>
<div style="border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif"> Jeff Thornton <<a href="mailto:thornton@tess-inc.com">thornton@tess-inc.com</a>>
<br>
<b>Sent:</b> Friday, March 27, 2020 3:34 PM<br>
<b>To:</b> TRNSYS users mailing list at OneBuilding.org <<a href="mailto:trnsys-users@lists.onebuilding.org">trnsys-users@lists.onebuilding.org</a>><br>
<b>Cc:</b> Hüseyin Günhan Özcan <<a href="mailto:huseyin.ozcan@yasar.edu.tr">huseyin.ozcan@yasar.edu.tr</a>>; David BRADLEY <<a href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>>; Muhammad Zeeshan <<a href="mailto:zeeshanmuhammad922@gmail.com">zeeshanmuhammad922@gmail.com</a>><br>
<b>Subject:</b> Re: [TRNSYS-users] Type 941(Air to water heat pump)</span><o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal">Simple question; did you connect the outputs of the heat pump ( temperature, humidity and flow rate) back to the building as ventilation inputs?<o:p></o:p></p>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal" style="margin-bottom:12.0pt">Jeff<o:p></o:p></p>
<div>
<p class="MsoNormal">Sent from my iPhone<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"><br>
<br>
<br>
<o:p></o:p></p>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<p class="MsoNormal" style="margin-bottom:12.0pt">On Mar 27, 2020, at 10:31 AM, David BRADLEY via TRNSYS-users <<a href="mailto:trnsys-users@lists.onebuilding.org">trnsys-users@lists.onebuilding.org</a>> wrote:<o:p></o:p></p>
</blockquote>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal"><span style="font-family:"Tahoma",sans-serif"></span> <o:p>
</o:p></p>
<p>Hüseyin,<o:p></o:p></p>
<p> I am not clear on what you mean by "it" doesn't change. I would recommend that you send the project, weather file, and heat pump files to your distributor so that they can have a look. If you aren't sure who to contact, please email me.<o:p></o:p></p>
<p>David<o:p></o:p></p>
<p> <o:p></o:p></p>
<div>
<p class="MsoNormal">On 03/27/2020 10:27, Hüseyin Günhan Özcan wrote:<o:p></o:p></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Dear David,</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Thanks for your rapid reply. As you said, I turned off the automatic heating and cooling. I can see the temperature of the zone is floating. I also used a second stage
thermostat (type 1503) and adjust the high and low stage temperatures. </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">However, it does not change although the temperature floats between 19 °C and 30 C°.
</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Regards.</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">HG Ozcan</span><o:p></o:p></p>
<div>
<div style="border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif"> David BRADLEY
<a href="mailto:d.bradley@tess-inc.com"><d.bradley@tess-inc.com></a> <br>
<b>Sent:</b> Friday, March 27, 2020 3:12 PM<br>
<b>To:</b> Hüseyin Günhan Özcan <a href="mailto:huseyin.ozcan@yasar.edu.tr"><huseyin.ozcan@yasar.edu.tr></a>; TRNSYS users mailing list at OneBuilding.org
<a href="mailto:trnsys-users@lists.onebuilding.org"><trnsys-users@lists.onebuilding.org></a><br>
<b>Cc:</b> Muhammad Zeeshan <a href="mailto:zeeshanmuhammad922@gmail.com"><zeeshanmuhammad922@gmail.com></a><br>
<b>Subject:</b> Re: [TRNSYS-users] Type 941(Air to water heat pump)</span><o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"> <o:p></o:p></p>
<p>Hüseyin<o:p></o:p></p>
<p> This may seem very basic but make sure that you have turned off the automatic heating and cooling in TRNBuild so that the temperature of your zone is floating. You can verify this by running your simulation; the zone temperature should more or less follow
the ambient temperature. You will then implement a thermostat to watch the zone temperature and turn on/off the heat pump accordingly.
<o:p></o:p></p>
<p> If that is what you are doing already and the power and capacity of the heat pump is not changing at all then it must mean that neither the return air temperature nor the water inlet temperature is changing at all. It could also mean that the return air
temperature and inlet water temperature are outside the range of data values given in the data file. The routine that reads the data file and interpolate within the range but cannot extrapolate beyond the range given.<o:p></o:p></p>
<p>kind regards,<o:p></o:p></p>
<p> David<o:p></o:p></p>
<p> <o:p></o:p></p>
<div>
<p class="MsoNormal">On 03/27/2020 09:29, Hüseyin Günhan Özcan wrote:<o:p></o:p></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Dear all,</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">I have a similar question about modeling air source heat pump.
</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">In my case I am working the model inverter heat pump so I selected the multi stage heat pump (Type 922c).</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Meanwhile, I connected its return temperature value to the Type 56 indoor temperature (I am following a single room) and I also use Type 15-6 for outdoor conditions.
Although I make some changes in the building file (internal heat gain, regimes, etc.) and weather data the model shows always the same values.</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Therefore, I realized that it only works based on external catalogue values. But, it does not make sense. Do you have an idea about this case ? How can type 922c operates
based on temperature variations belongs to the building.</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Another question is how can I change the catalogue values ? (I have no problem in proforma including parameter, input and output parts).</span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><span lang="EN-US" style="font-size:11.0pt;mso-fareast-language:EN-US">Thanks in advance.</span><o:p></o:p></p>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt">Huseyin Gunhan Ozcan</span></b><o:p></o:p></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt">Visiting Researcher</span></b><o:p></o:p></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt">Porto Uni., Dept. of Mech. Eng.</span></b><o:p></o:p></p>
<p class="MsoNormal"><b><span style="font-size:11.0pt"> </span></b><o:p></o:p></p>
<div>
<p class="MsoNormal"><b><span style="font-size:11.0pt;font-family:"Yu Gothic",sans-serif"><image001.png></span></b><o:p></o:p></p>
</div>
<p class="MsoNormal"><span style="font-size:11.0pt;mso-fareast-language:EN-US"> </span><o:p></o:p></p>
<div>
<div style="border:none;border-top:solid #E1E1E1 1.0pt;padding:3.0pt 0cm 0cm 0cm">
<p class="MsoNormal"><b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif">From:</span></b><span lang="EN-US" style="font-size:11.0pt;font-family:"Calibri",sans-serif"> TRNSYS-users
<a href="mailto:trnsys-users-bounces@lists.onebuilding.org"><trnsys-users-bounces@lists.onebuilding.org></a>
<b>On Behalf Of </b>David BRADLEY via TRNSYS-users<br>
<b>Sent:</b> Friday, March 27, 2020 1:45 PM<br>
<b>To:</b> TRNSYS users mailing list at OneBuilding.org <a href="mailto:trnsys-users@lists.onebuilding.org">
<trnsys-users@lists.onebuilding.org></a><br>
<b>Cc:</b> David BRADLEY <a href="mailto:d.bradley@tess-inc.com"><d.bradley@tess-inc.com></a>; Muhammad Zeeshan
<a href="mailto:zeeshanmuhammad922@gmail.com"><zeeshanmuhammad922@gmail.com></a><br>
<b>Subject:</b> Re: [TRNSYS-users] Type 941(Air to water heat pump)</span><o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"> <o:p></o:p></p>
<p>Muhammad,<o:p></o:p></p>
<p> Please refer to the Type941 documentation. It explains how the external files and the parameters relate to each other to compute the overall capacity and power consumption of the heat pump.
<o:p></o:p></p>
<p> The evaporator does not really need to be designed more than to choose a machine with an appropriate rated capacity. Traditionally that might mean adding a safety factor to the peak cooling load (10% is often used) and then selecting a machine that will
meet that capacity. Also bear in mind that Type941 models a single speed (ie single capacity) heat pump that is either on or off. Depending on how variable the load in your building it, you might want to meet that load with multiple smaller heat pumps rather
than one big one.<o:p></o:p></p>
<p>kind regards,<o:p></o:p></p>
<p> David<o:p></o:p></p>
<p> <o:p></o:p></p>
<div>
<p class="MsoNormal">On 03/27/2020 08:02, Muhammad Zeeshan via TRNSYS-users wrote:<o:p></o:p></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p class="MsoNormal">Hello Everyone, <o:p></o:p></p>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> I am working on cooling a building with type 41(air to water source heat pump). The cooling load of the building is 25 tons. I want to know<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal">1)- how the compressor power will be calculated? as the external files of type 941 contains fractions of compressor power which shows no link to the equations provided in manual. How to link the external file with the provided equations?<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal">2)-As the cooling load of the building is 25 tons, how to design the evaporator for this building load?<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal">Your help in this regard will be highly appreciated.<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
<div>
<p class="MsoNormal">Regards,<o:p></o:p></p>
</div>
<div>
<p class="MsoNormal">Muhammad Zeeshan<o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"><br>
<br>
<br>
<br>
<br>
<o:p></o:p></p>
<pre>_______________________________________________<o:p></o:p></pre>
<pre>TRNSYS-users mailing list<o:p></o:p></pre>
<pre><a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a><o:p></o:p></pre>
<pre><a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a><o:p></o:p></pre>
</blockquote>
<pre>-- <o:p></o:p></pre>
<pre>***************************<o:p></o:p></pre>
<pre>David BRADLEY<o:p></o:p></pre>
<pre>Principal<o:p></o:p></pre>
<pre>Thermal Energy Systems Specialists, LLC<o:p></o:p></pre>
<pre>3 North Pinckney Street - suite 202<o:p></o:p></pre>
<pre>Madison, WI 53703 USA<o:p></o:p></pre>
<pre> <o:p></o:p></pre>
<pre>P:+1.608.274.2577<o:p></o:p></pre>
<pre>F:+1.608.278.1475<o:p></o:p></pre>
<pre><a href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a><o:p></o:p></pre>
<pre> <o:p></o:p></pre>
<pre><a href="http://www.tess-inc.com">http://www.tess-inc.com</a><o:p></o:p></pre>
<pre><a href="http://www.trnsys.com">http://www.trnsys.com</a><o:p></o:p></pre>
<table class="MsoNormalTable" border="0" cellpadding="0">
<tbody>
<tr>
<td style="background:white;padding:.75pt .75pt .75pt .75pt">
<pre><span style="color:black">Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,</span><o:p></o:p></pre>
<pre><span style="color:black">Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi</span><o:p></o:p></pre>
<pre><span style="color:black">dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.</span><o:p></o:p></pre>
<pre><span style="color:black"> </span><o:p></o:p></pre>
<pre><span style="color:black"> </span><o:p></o:p></pre>
<pre><span style="color:black">The information contained in this e-mail and any files transmitted with it are intended solely for the use of the</span><o:p></o:p></pre>
<pre><span style="color:black">individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the </span><o:p></o:p></pre>
<pre><span style="color:black">contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.</span><o:p></o:p></pre>
</td>
</tr>
</tbody>
</table>
</blockquote>
<pre>-- <o:p></o:p></pre>
<pre>***************************<o:p></o:p></pre>
<pre>David BRADLEY<o:p></o:p></pre>
<pre>Principal<o:p></o:p></pre>
<pre>Thermal Energy Systems Specialists, LLC<o:p></o:p></pre>
<pre>3 North Pinckney Street - suite 202<o:p></o:p></pre>
<pre>Madison, WI 53703 USA<o:p></o:p></pre>
<pre> <o:p></o:p></pre>
<pre>P:+1.608.274.2577<o:p></o:p></pre>
<pre>F:+1.608.278.1475<o:p></o:p></pre>
<pre><a href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a><o:p></o:p></pre>
<pre> <o:p></o:p></pre>
<pre><a href="http://www.tess-inc.com">http://www.tess-inc.com</a><o:p></o:p></pre>
<pre><a href="http://www.trnsys.com">http://www.trnsys.com</a><o:p></o:p></pre>
<table class="MsoNormalTable" border="0" cellpadding="0">
<tbody>
<tr>
<td style="background:white;padding:.75pt .75pt .75pt .75pt">
<pre><span style="color:black">Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,</span><o:p></o:p></pre>
<pre><span style="color:black">Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi</span><o:p></o:p></pre>
<pre><span style="color:black">dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.</span><o:p></o:p></pre>
<pre><span style="color:black"> </span><o:p></o:p></pre>
<pre><span style="color:black"> </span><o:p></o:p></pre>
<pre><span style="color:black">The information contained in this e-mail and any files transmitted with it are intended solely for the use of the</span><o:p></o:p></pre>
<pre><span style="color:black">individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the </span><o:p></o:p></pre>
<pre><span style="color:black">contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.</span><o:p></o:p></pre>
</td>
</tr>
</tbody>
</table>
</blockquote>
<pre>-- <o:p></o:p></pre>
<pre>***************************<o:p></o:p></pre>
<pre>David BRADLEY<o:p></o:p></pre>
<pre>Principal<o:p></o:p></pre>
<pre>Thermal Energy Systems Specialists, LLC<o:p></o:p></pre>
<pre>3 North Pinckney Street - suite 202<o:p></o:p></pre>
<pre>Madison, WI 53703 USA<o:p></o:p></pre>
<pre> <o:p></o:p></pre>
<pre>P:+1.608.274.2577<o:p></o:p></pre>
<pre>F:+1.608.278.1475<o:p></o:p></pre>
<pre><a href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a><o:p></o:p></pre>
<pre> <o:p></o:p></pre>
<pre><a href="http://www.tess-inc.com">http://www.tess-inc.com</a><o:p></o:p></pre>
<pre><a href="http://www.trnsys.com">http://www.trnsys.com</a><o:p></o:p></pre>
<p class="MsoNormal">_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a><br>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a><o:p></o:p></p>
</div>
</blockquote>
</div>
<table class="MsoNormalTable" border="0" cellpadding="0">
<tbody>
<tr>
<td style="background:white;padding:.75pt .75pt .75pt .75pt">
<pre><span style="color:black">Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,<o:p></o:p></span></pre>
<pre><span style="color:black">Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi<o:p></o:p></span></pre>
<pre><span style="color:black">dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.<br><br><br><o:p></o:p></span></pre>
<pre><span style="color:black">The information contained in this e-mail and any files transmitted with it are intended solely for the use of the<o:p></o:p></span></pre>
<pre><span style="color:black">individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the <o:p></o:p></span></pre>
<pre><span style="color:black">contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.<o:p></o:p></span></pre>
</td>
</tr>
</tbody>
</table>
<p class="MsoNormal"><o:p> </o:p></p>
</div>
</blockquote>
</div>
</div>
</body>
</html>
<table><tr><td bgcolor=#ffffff><font color=#000000><pre>Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup,
Yasar Universitesi bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi
dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.<br><br>
The information contained in this e-mail and any files transmitted with it are intended solely for the use of the
individual or entity to whom they are addressed Yasar University does not accept legal responsibility for the
contents. If you are not the intended recipient, please immediately notify the sender and delete the message from your system.</pre></font></td></tr></table>