<div dir="ltr"><div>Hello, <br></div><div>I created a coupled project with Contam 3.2 and Trnsys 17 but when I run the simulation, it shows this error that may or may not have originated from the model. <br></div><div><span style="color:rgb(111,168,220)"><i>message: ((The project path given is longer than the allowed 260 characters by Windows))</i></span><br></div><div>Though it says that the length of path for the current project exceeds the maximum limit but it Doesn't. <br></div><div>I also enabled the filesytem's<i> LongPathsEnabled </i>but the error persists. <br></div><div>The files show the same error in another computer too. <br></div><div>What else should I do?  <br></div><div>Regards,<br></div><div>Obaid<br></div><div><div><img src="cid:ii_k69e18c10" alt="Simulation_Studio.jpg" width="541" height="273"><br><div><img src="cid:ii_k69eqfm71" alt="error.jpg" width="561" height="117"><br></div></div></div></div>