<div dir="ltr">hello trnsys users<div>I m heating a greenhouse with water source heat pump as you see in the figure.</div><div>I m using a lake as the heat source ( open loop system)</div><div>my heat pump values are there</div><div><br></div><div>Rated heating capacity : 58120 kj/hr</div><div>rated heating power : 15120     kj/hr </div><div>inlet source flowrate : 1700 kg/hr</div><div>inlet load flowrate : 2600 kg/hr</div><div><br></div><div>and my lake montly temperatures</div><div>january : 4 santigrad degree</div><div>february :5</div><div>march : 6 ...etc.</div><div><br></div><div>so my question is that my heat pump output source temperature and the inlet source temperature are same,   is this normal ? </div><div><br></div><div>I thınk the output source temperature should be less than inlet source temperature( 4 degrees and changing montly ). because the source energy is absorbed in heating mode.<br></div><div><br></div><div>thanks </div><div><div><img src="cid:ii_k05ksejl0" alt="heatpmp1.jpg" width="452" height="283"><div><img src="cid:ii_k05ksek31" alt="heatpmp2.jpg" width="452" height="283"><br></div></div></div><div> </div></div>