<div dir="ltr">hi trnsys users<div>first of all ı want to thanks to Jeff , David and other trnsys user for previous  good explanation.I didn't send a thanks messages because I don't want to make garbage</div><div><br></div><div>I' m  currently try to heat and cool a 100 m2 greenhouse with water source heat pump and fan coils.</div><div>I calculated the heating and cooling loads. and I have 61113 kj/hr maximum heating load and 53213 kj/hr maximum cooling load. now ı m using type 927 and my heat source is a lake that has  4 degree temperature in january and 23 degree in july. ıs that heat pump suitable for heating and cooling ( when ı examıne the catalog data the heating capacity is about 1 kwh. I thınk this value isn't sufficient) </div><div>How can I add a water source heat pump catalog data for trnsys. ?Can someone explain it step by step </div><div><br></div><div>2) can I change Rated Heating Capacity per Heat Pump and Rated Heating Power per Heat Pump paramaters in type 927 ? </div><div><br></div><div>regards</div><div><br></div><div><br></div></div>