<div dir="ltr">Dear TRNSYS users,<div><br></div><div>I do have a question about double and single effect absorption models. When I check the catalog data of Type 107 (single-effect) and Type 677 (double-effect) absorption models I realized that especially for double effect systems capacity reduces dramatically according to hot water inlet temperature. I would like to make a comparison of single and double effect models performances. When I would like to compensate the same amount of cooling load of a building with two seperate models of single or double effect absorption chillers, auxiliary heat requirement is much larger for double effect system which is not reasonable. I  tried two options first I chose a high rated capacity and low hot water inlet temperature (27.8 kW and 126 C in order to compensate 6kW cooling load) and chiller worked at part load, secondly I chose very high inlet temperature (175 C) and capacity of the chiller is as the same with the cooling load of the building (6 kW) works at full load . For any case, my double effect absorption chiller requires enormous auxiliary heat when compared to single effect one, even though it has better COP values than the single effect chiller. </div><div><br></div><div>If you can help me I will be appreciated, I am really confused. </div><div><br></div><div>Kind regards,<br clear="all"><div><br></div>-- <br><div dir="ltr" class="m_-2372383893951415164m_-4594928293797867702gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Ar.Gör. Ayşe Fidan ALTUN</div><div dir="ltr"><br><div><div style="font-size:12.8px">Uludağ Üniversitesi</div><div style="font-size:12.8px">Mühendislik Fakültesi</div><div style="font-size:12.8px">Makina Mühendisliği Bölümü</div><div style="font-size:12.8px">Bursa, Türkiye</div><div style="font-size:12.8px">e-mail: <a href="mailto:mkilic@uludag.edu.tr" style="color:rgb(17,85,204)" target="_blank">aysealtun@uludag.edu.tr</a></div><div style="font-size:12.8px"><br></div><div style="font-size:12.8px"> </div><div style="font-size:12.8px">Uludag University,</div><div style="font-size:12.8px">Engineering Faculty,</div><div style="font-size:12.8px">Department of Mechanical Engineering,</div><div style="font-size:12.8px">Bursa, Turkey</div></div></div></div></div></div></div></div></div></div>