<div dir="ltr"><div>Amaia,</div><div><br></div><div>what settings did you take for losses to the surroundings?</div><div><br></div><div>Leen<br></div></div><br><div class="gmail_quote"><div dir="ltr">On Sun, 7 Oct 2018 at 21:35, Amaia Zuazua Ros via TRNSYS-users <<a href="mailto:trnsys-users@lists.onebuilding.org">trnsys-users@lists.onebuilding.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><br><div>Hi <span id="m_7696932586901763763:1bt.3">TRNsys</span> users,</div><div><br></div><div>I am simulating a water to water chiller coupled to two storage tanks one each side of the chiller. It's the first time that I work with tanks (I'm using type 4), and I understand that the energy balance should be accomplish, I mean, the total energy coming from the source should be the same than the energy going to the load, but this is not happening in my case with the condenser side of the chiller (the <span id="m_7696932586901763763:1bt.4">annual</span> totals have around 10% difference) and still the system seems to work (the idea is to simulate a radiative system that dissipates the heat from the condenser). I don't know if it can be related to the internal energy change of the tank. Could some one give a bit further explanation/information about this?</div><div><br></div><div>Thanks in advance!</div><div><br></div><div><span id="m_7696932586901763763:1bt.5">Amaia</span></div></div>
_______________________________________________<br>
TRNSYS-users mailing list<br>
<a href="mailto:TRNSYS-users@lists.onebuilding.org" target="_blank">TRNSYS-users@lists.onebuilding.org</a><br>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org" rel="noreferrer" target="_blank">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a><br>
</blockquote></div>