<div> Dear Transys users</div><div><br></div><div>   I¡®m doing a transys cooling system simulation.In my model,i use a PID controller to change the cooling capacity to meet the cooling load.But it oscillate heavily(as <br></div><div><br></div><div>the picture i pasted below) .I doubt that it maybe caused by the  timestep (0.125 hour) or the PID parameter, If anyone can  help me figure out the problem i colud <br></div><div><br></div><div>be very appreciated,thanks. <br></div><div><br></div><div><img src="cid:2FFBF4FF@9F53FA3B.14428F5B" style="width: 582px; height: 283px;" modifysize="25%" diffpixels="-1px" scalingmode="zoom"></div><div><br></div><div>       best regards <br></div><div><br></div><div>       Liao Gang</div><div><br></div><div>  Central South University<br></div>