<div dir="ltr"><div>Dear All,</div><div><br></div><div>As I have just created the single room with two air nodes and the radiant ceiling system, I have some doubts regarding the coupling aspect. In the picture below, according to the manual, I activated the coupling of the airnode and indicated that the air flow direction.</div><div><br></div><div><div><img src="cid:ii_jifskybr0_16402da0b30d0b5f" width="530" height="496"><br></div></div><div><br></div><div>Due to that, I have a few questions to you:</div><div><br></div><div>1. Do I have to activate the coupling for the airnode '<i>GROUND_FLOOR_175</i>' by ticking the <i>activate</i> box? If yes, should I leave the coupling air flow equals to 0, since there is only ceiling heating in my room?</div><div><br></div><div>2. I am trying to visualize the temperature difference between two airnodes, however, they are strongly dependant on the <i>coupling air flow</i> value. I have put some arbitrary low and high values, but I am not sure what is the correct number and how can I prove that the value I choose might be reasonable for my system?</div><div><br></div><div>I would like to thank you in advance for your help.</div><div><br></div><div>Kind regards,</div><div>Lukasz Watly<br></div></div>