<div dir="ltr"><div>Dear All,</div><div><br></div><div>As I am trying to perform simulations of the single room with ceiling heating system, I would have some questions regarding the values definition of the Active Layer window, presented below.<br></div><div><br></div><div><div><div><img src="cid:ii_ji34rb4c1_163d537c84785d5a" width="530" height="282"><br></div><br></div></div><div><br></div><div>1. What is the meaning of the "<i>gain</i>" value?</div><div><br></div><div>2. When I am performing the simulation in TRSYS with different "<i>min. desired inlet mass flowrate</i>" values, I got the same results (for example, I changed the specific value from 20 to 50 and the room temperature curve remains the same). Thus, what does the value represent? How is it connected with "<i>inlet mass flow rate</i>" value?<br></div><div><br></div><div>3. In the active layer definition, I put the<i> inlet temperature</i> and <i>mass flow rate</i> numbers. However, how is it possible to obtain the <i>outlet temperature</i> of the heating system?</div><div><br></div><div>4. How can I measure the value of the surface temperature of the ceiling?</div><div><br></div><div>5. What does the <i>Qsens</i> represent in more details?</div><div><br></div><div>If there is a document where I could get more information of the aforementioned values description, please let me know.</div><div><br></div><div>I would like to thank you in advance for your help.</div><div><br></div><div>Kind regards,</div><div>Lukasz Watly<br></div><div><br></div></div>