<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
<html><body>
<p><How can i to specify (N_Sources * n_loads) data points></p>
<p>The data file takes a row of source temperatures and a row of load temperatures. If there are 7 source and 6 load temperatures then you will need to specify 42 lines of data. Please refer to the example data files for the Type 668 model and the description of Type 42 - a component that uses a similar data file structure and explains in great detail how to set up the files.</p>
<p> </p>
<p>Jeff</p>
<p> </p>
<div>
<pre>---<br />Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
</pre>
</div>
<p>On 05/07/2018 10:44 pm, berkane ahlem via TRNSYS-users wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<p dir="ltr">Hello sir<br /> How can i to specify (N_Sources * n_loads) data points<br /> I used heat pump type 668in trnsys 16 <br /> Thank you</p>
<br />
<pre>_______________________________________________
TRNSYS-users mailing list
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
</body></html>