<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
<html><body>
<p><I model a heat pump system and i create input data file for heating and i change the parameter 7 and 8 the problem is the simulation doesn't run<br /> Please find the attached of data file></p>
<p>Your data file has 4 identical temperatures in the first line - that makes it kind of hard to do interpolation between data points. Put in one data point if you only have one data point and change the corresponding parameter. The other thing I noticed is that you have to specify (N_Sources * n_loads) data points - which you did not do. Also when you write in, please let us know which model you are using.</p>
<p> </p>
<p>Jeff</p>
<p> </p>
<div>
<pre>---<br />Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
</pre>
</div>
<p>On 05/07/2018 4:39 pm, berkane ahlem via TRNSYS-users wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<p dir="ltr">Hello sirs,<br /> I model a heat pump system and i create input data file for heating and i change the parameter 7 and 8 the problem is the simulation doesn't run<br /> Please find the attached of data file<br /> Thank you</p>
<br />
<pre>_______________________________________________
TRNSYS-users mailing list
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
</body></html>