<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
<html><body>
<p><I simulate a horizontal ground heat exchange type556 in trnsys 16 , how can i calculate the no flow convetion coeffcient></p>
<p>We strongly recommend that you not use Type 556. This model was written quite a few years ago by a graduate student and subsequent testing has revealed that the methodology is somewhat flawed. The model has been replaced with the Type 997 horizontal ground heat exchanger model in our libraries and I suggest that you consider upgrading to that model.</p>
<p> </p>
<p>Jeff Thornton</p>
<p>TESS</p>
<p> </p>
<div>
<pre>---<br />Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
</pre>
</div>
<p>On 04/23/2018 12:38 pm, berkane ahlem via TRNSYS-users wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<p dir="ltr">Hello,sirs<br /> I simulate a horizontal ground heat exchange type556 in trnsys 16 , how can i calculate the no flow convetion coeffcient<br /> Thank's</p>
<br />
<pre>_______________________________________________
TRNSYS-users mailing list
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
</body></html>