<div dir="ltr"><div class="gmail_default" style="font-size:small;color:#0b5394">Hi everyone,</div><div class="gmail_default" style="font-size:small;color:#0b5394"><br></div><div class="gmail_default" style="font-size:small;color:#0b5394">I have modeled the system comprising of a variable capacity heat pump (custom component) transferring heat to the house via radiators Type 1231 (TESS library). From the simulation results, the differences between entering and leaving water temperature of radiators are within 7 Celcius, meaning the heat pump quickly operates at the lowest part load. However, I want to increase those temperature differences about more than 10 Celsius, as observed from our measurement results, in order to force the heat pump to work at higher load. I have tried to alter the parameters of Type 1231 but it seems to be uninfluenced. I see if changing the flow rate can alter those differences, but that is not right for my model which affects the heat pump side. </div><div class="gmail_default" style="font-size:small;color:#0b5394"><br></div><div class="gmail_default" style="font-size:small;color:#0b5394">Could you please help me if possible?</div><div class="gmail_default" style="font-size:small;color:#0b5394"><br></div><div class="gmail_default" style="font-size:small;color:#0b5394">Thank you.<br></div><div class="gmail_default" style="font-size:small;color:#0b5394">         <br></div><div><div class="gmail_default" style="font-size:small;color:rgb(11,83,148)">Khoa Le.</div><br></div><br><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div dir="ltr"><div><br></div><div><br></div></div></div></div></div></div>
</div>