<div dir="ltr">Hi everyone,<div><br></div><div>I am currently deciding which hot water temperature range that is appropriate enough for an absorption chiller to operate. Initially i thought it is ok to set hot water temperature range to be 110 to 100 oC at generator inlet and outlet, respectively, meaning 100oC flows into solar collector and , at least, 110oC needs to be produced out of it. Is the temperature range i chose unpractical ? not sure if most of the times heat would lost as water flows through the collector instead of getting heat.</div><div><br></div><div>Thanks a lot.</div><div><br></div><div>Sincerely.</div><div>Althur </div></div>