<div dir="ltr">Hi all,<div><br></div><div>I am currently using Type 539 to model a solar thermal collector, and i would need to retrieve not only the useful energy fluid gain but also the thermal losses and energy stored. Unfortunately there is not such an output from the model.</div><div><br></div><div>I tried defining N collectors in series with one node only to be able to retrieve the temperature of each node but the results differ... I have fixed the area, the heat capacity and the test flow rate, but the results differ significantly.</div><div><br></div><div>I would appreciate any help on how to obtain this information from TRNSYS.</div><div><br></div><div>Kind regards,</div><div><br></div><div>Oriol Casal</div></div>