<div dir="ltr"><div><div><div><div><div><div><div><div><div>Hello,<br><br></div>I have difficulties importing an idf file created with Sketchup.<br></div>The import goes mainly well, except for 3 surfaces (2 walls and 1 window, which belong to one of these walls), for which I got the following error message: "adjacent wall not found" and "adjacent window not found".<br><br></div>These walls are indeed interior walls. They are set as "ADJ_WALL", with "Outside Boundary Condition" set as "Zone", with the correct corresponding zone. And in the adjacent zone, the walls have the same construction, and the reciprocal zone set.<br><br></div>All vertices correspond exactly.<br><br></div>Basically I followed these instructions: <a href="http://onebuilding.org/archive/trnsys-users-onebuilding.org/2013-February/024640.html">http://onebuilding.org/archive/trnsys-users-onebuilding.org/2013-February/024640.html</a><br><br></div>..but in the TRNBUILD, I do have "undefined" written next to that walls. <br><br></div>I join here my idf.<br><br></div>Thanks a lott for any help!<br></div>Arnaud.<br></div>