<div dir="ltr">Good morning,<div><br></div><div>I am trying to model a stratified tank and I would like to do it using the type534 included in the TESS libraries.</div><div>I encountered a problem while I was opening the plugin to define the tank configuration. </div><div>Please find attached 2 screenshots representing what I got when I tried to open the plugin from simulation studio or from the *.exe file in the installation folder.</div><div><br></div><div>I am not able to understand how to modify the *.dat file to get the configuration I have to simulate.</div><div><br></div><div>Also, searching in the TRNSYS newsletter archive, I found out that this is a common issue for this component and it is not simple to be solved. If this is correct: could you please generate the *.dat file for me? </div><div>Please find attached a sketch of the tank that I should model. It has six ports (3 inlets + 3 outlets) and no heat exchangers. The flow rate is 20 m³/hr for all the ports and fluid is water.</div><div><br></div><div>Thanks in advance for your help!</div><div><br></div><div>Best Regards,</div><div><br></div><div>Marco Scarpellino</div></div>