<div dir="ltr"><div><div><div><div>Hello TRNSYS users,<br><br></div>I am testing a sub-hourly (10-min data) .epw weather file created with the EnergyPlus weather converter utility using measured data, read into a simple PV model in TRNSYS by Type 15. It seems to work fine until about halfway through the simulation when it crashes with a fatal error:<br><br>"The simulation timestep is greater than the data timestep for the radiation calculation. The simulation timestep needs to be reduced."<br><br></div>Reviewing the .epw file there is nothing unusual at this or nearby timesteps, except that it is a period of 24-hour sunlight. But, the simulation does not fail when this phenomena is first encountered. <br><br></div>I note a similar problem on the message board:<br><br><a href="http://onebuilding.org/archive/trnsys-users-onebuilding.org/2012-November/024289.html" target="_blank">http://onebuilding.org/<wbr>archive/trnsys-users-<wbr>onebuilding.org/2012-November/<wbr>024289.html</a><br><br></div><div>Any guidance would be greatly appreciated.<br></div><div><br></div><div>Regards,<br></div><div>Michael Brown<br></div><div>Carleton University, Ottawa, Canada<br></div><div><br></div><br></div>