<div dir="ltr"><div>Dear TRNSYS Users,</div><div><br></div><div>I am trying to use either TYPE 927 or 1221 in combination with unglazed solar collectors and have some questions. If you have any experience with W-W HP components, I would love to hear from you. </div><div><br></div><div><b>1. Calculation of COP and Power </b></div><div><br></div><div>For some reason, when I input load temperature ,source temperature and flow rate exactly as listed in heating performance file, the COP and power consumption calculated by the component is different than the values entered in the data file. <br></div><div><b><br></b></div><div><b>Example </b></div><div>A line of  example heating data file reads: (pre-installed example) (Heating capacity =30000, Heating power=6000) </div><div><br></div><div>0.9007<span class="gmail-Apple-tab-span" style="white-space:pre"> </span>0.6731<span class="gmail-Apple-tab-span" style="white-space:pre">                                                </span>!Normalized Capacity and Normalized Power at 1, 1, 15.556[C], -1.1111[C]<br></div><div><br></div><div>But when I put input load temperature 15.556  , source -1.11, input and output mass flow = 1440 ( 0.4 l/s ,rated) , the model calculates Power and COP  as 5961 kJ/hr and 4.59, when clearly the input file shows power to be (0.67*6000), which is not at all equal to what model calculates. COP values are different too. For all these I just used Type 927 with no change and the file is attached. </div><div><br></div><div><b>So my question is, am I understanding everything wrong or are there some bugs in the code itself ? </b></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div>I hope, someone will be kind enough to answer me. </div><div><br></div><div>Your's</div><div>Khem Gautam </div><div>Masters student </div><div>Aarhus University, Denmark. </div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div>
</div>