<div dir="ltr">hi everyone,<div><br></div><div>i have one question i am stuck with this problem.</div><div><br></div><div>1- i want heating a room having one window, by using type 56</div><div><br></div><div>inside temp = 10, 20, 30,....</div><div><br></div><div>dry bulk temp= ambient  temp = outside = 0</div><div><br></div><div>sky temp = 0 and -20</div><div><br></div><div>i wanna see the change in overall heat transfer coefficient = u-value of glazing (window) by changing inside temperature using this equation</div><div><br></div><div>U = Q / A(T) where <br></div><div>U = U-value</div><div>q= convective and radiative heat loss</div><div>A = Area of window</div><div>T = ambient and inside temp difference.</div><div><br></div><div>i get results but TRNSYS giving me almost the same value of U for all temp difference. trend is not same as experimental U-value trend according to change in inside temp. </div><div><br></div><div>anyone please help me with this is it possible to calculate U-value of window like this. or trnsys use fix U-value for the calculation of heat load.</div><div><br></div><div>thanks in advance. for killing your time.</div><div><br></div><div>Regards</div><div>Adnan</div></div>