<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css" style="display:none;"><!-- P {margin-top:0;margin-bottom:0;} --></style>
</head>
<body dir="ltr">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;background-color:#FFFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;">
<p>Hello TRNSYS users, </p>
<p><br>
</p>
<p>I want to model a battery bank( 22 batteries, 11 series, 2 parallel). </p>
<p>known properties about a battery 100Ah. </p>
<p><br>
</p>
<p><br>
</p>
<p> I want to model this using 47b, I am wondering about following properties of 47b.
</p>
<p><br>
</p>
<p><br>
</p>
<p>INPUT PARAMETERS</p>
<p>1. Cell Energy Capacity Ah ( would that be ok to plugin 100Ah here which is total capacity of a battery )
</p>
<p>2. Cells in parallel ( would that be ok to plugin 2 which depicts two rows of batteries)
</p>
<p>3. Cells in Series ( would that be ok to plugin 11 which batteries in one row)
</p>
<p><br>
</p>
<p>It is clearly understood that these properties are for each cell of a single battery. If I have to have enter the cell properties for a single battery. How I can model a battery bank?
</p>
<p><br>
</p>
<p>OUTPUT PARAMETERS</p>
<p><br>
</p>
<p>1. State of charge: The State Of Charge is expressed in the same units as the rated cell capacity (Ah). This value is given for one cell (all cells are assumed to be identical).
</p>
<p>Question: this values goes up to 400Ah, I wondering about this because Plugged in cell energy capacity is only 100Ah.[input1]</p>
<p><br>
</p>
<p>Any help will be greatly appreciated! </p>
<p><br>
</p>
<p>Thanks, </p>
<p>Sandeep Chahal </p>
<p>UAB </p>
</div>
</body>
</html>