<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
</head>
<body dir="auto">
<div>Dear David,</div>
<div><br>
</div>
<div>Thank you very much for your reply.</div>
<div><br>
</div>
<div>Im using temperature level control method. My internal gains are defined internally by TRNbuilt. Is that correct or do i need to define it externally ?</div>
<div><br>
</div>
<div>My humidity ratio level went almost zero during summer when i removed insulation from adjacent walls while keeping the insulation for external walls only. Im a bit concerned about it. Does that makes sense ?<br>
<br>
Thanks and regards,</div>
<div>Aisha<br>
<br>
</div>
<div><br>
On Jun 15, 2015, at 6:50 PM, David BRADLEY <<a href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>> wrote:<br>
<br>
</div>
<blockquote type="cite">
<div>Ayesha,<br>
The literature I have seen suggests that humidity capacitance multipliers typically range from about 5 to 15. The value is a multiplier on the humidity capacitance of the air in the zone. If you have set a value of 5 then you're telling Type56 that the zone
can absorb 5 times as much moisture as can be absorbed by the air in the zone. If you increase the value then your zone's humidity ratio will change more slowly. The humidity ratio will not necessarily increase overall. If you are concerned about the humidity
level then check to make sure that you are applying a reasonable amount of outdoor air ventilation to your zones and also make sure that you have accounted for latent energy gains in the zone not only from people but from other sources as well.<br>
kind regards,<br>
David<br>
<br>
<br>
<div class="moz-cite-prefix">On 06/14/2015 06:34, Ayesha Mohammed Al Qubaisi wrote:<br>
</div>
<blockquote cite="mid:2A54F18524F711459AEE678374BED4D11492693F@SRV03004.PI.AC.AE" type="cite">
<meta name="Generator" content="Microsoft Word 14 (filtered
medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal">Dear all,<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">I get very low humidity ratio when I run TRNSYS for building.<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Does that have any relation with humidity capacity value inside TRNbuilt?<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">I set it as 5. Should I increase it?<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Thanks and regards,<o:p></o:p></p>
<p class="MsoNormal">Ayesha<o:p></o:p></p>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset> <br>
<pre wrap="">_______________________________________________
TRNSYS-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
<a class="moz-txt-link-abbreviated" href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.tess-inc.com">http://www.tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.trnsys.com">http://www.trnsys.com</a></pre>
</div>
</blockquote>
</body>
</html>