<div dir="ltr">Hi everyone,<div><br></div><div>I tried to add a thermal storage (type 533), to the existing Tess Models example high temperature solar library/annual solar field.tpf, before the expansion tank, connecting the solar field to it's HX1 .</div><div>Everything was just fine and the model ran with no errors. </div><div>Then I would like to add component for the second heat exchanger of type 533 (HX2). I chose type 114 trying to simulate a geothermal well (flowrate=15 m3/hr and temperature 60C).</div><div>This end up in 2 fatal errors in the log file. see the attached jpeg.</div><div><br></div><div>I cannot find parameter 50 for type 533 in it's parameter tab.</div><div>Do you have any suggestions?</div><div><br></div><div>Kind regards </div><div>Alex</div><div><br></div><div><br></div></div>