<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
<html><body>
<p>Johannes,</p>
<p>I took a look at your project and I think you should take a step back and work on things a bit at a time. I've attached a simple project showing how a 70 C cooling stream is connected to an IC Engine with a varying load. Take the time to completely understand how this project works before connecting up the tank, condenser, tank cooling stream etc. Remember that the odds of the default engine performance files being identical to your particular machine are small - you may have to modify the parameters and external files to match your given simulation. Your question as to "Next, I have thermal load profiles in kWh. I don't know how I can integrate the load to unload the storage." How do they do it in real life? There's your answer. I'm guessing they have a pumped flow through the tank that uses the thermal energy. Try the flowstream loads component, controllers, pipes, pumps etc to mimic the real world system.</p>
<p> </p>
<p>Jeff</p>
<p> </p>
<p> </p>
<p> </p>
<div>
<pre>---<br />Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
</pre>
</div>
<p>On 05/20/2015 8:51 am, Johannes Kirch wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<div style="font-family: Verdana; font-size: 12.0px;">
<div>
<div>Dear Jeff,</div>
<div> </div>
<div>thank you for your fast answer. In my mail before, I said that I want to load the thermal storage tank with the heat out of the exchangers. I tried to simulate a real CHP unit with 5.5 kW elec and 12.5 kW thermic. The CHP unit works just in full load, that means "on" or "off". There are four HX in the CHP to gain the heat out of generator, oil cooler, water jacket and exhaust. At the outlet of the CHP should be 83 °C to load the storage with that temperature and back to the CHP after the condenser with 70 °C (max.). There is a fluid flowrate to cool the components with 823 kg/hr. But I don't get the desired 83 °C. There must be a mistake between oil cooler and water jacket as you can see in the plot. A pdf with the function principle is in the Annex.</div>
<div>Next, I have thermal load profiles in kWh. I don't know how I can integrate the load to unload the storage. As you can see in the project there is no "feedback" through the CHP with 70°C, because the "load side" is incomplete. The load side is should be a HX to dump the arriving heat. So there is no unloading of the storage.</div>
<div>The project and thermal load (.txt) are in the Annex.</div>
<div> </div>
<div>Kind regards,</div>
<div>Johannes Kirch</div>
<div>
<div style="margin: 10px 5px 5px 10px; padding: 10px 0 10px 10px; border-left: 2px solid #C3D9E5; word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space;">
<div style="margin: 0 0 10px 0;"><strong>Gesendet:</strong> Samstag, 16. Mai 2015 um 22:38 Uhr<br /><strong>Von:</strong> "Jeff Thornton" <thornton@tess-inc.com><br /><strong>An:</strong> "TRNSYS users mailing list at OneBuilding.org" <trnsys-users@lists.onebuilding.org><br /><strong>Betreff:</strong> Re: [TRNSYS-users] TYPE907</div>
<div>
<div>
<div>I don't have the proforma in from of me but do you have flow through all the required inlets (cooling water, etc) and any on/off control signals set on? If you're convinced you do, it would help to send the project along.</div>
<div> </div>
<div>Jeff Thornton</div>
<div>TESS<br /><br /> Sent from my iPhone</div>
<div><br /> On May 16, 2015, at 12:17 PM, Johannes Kirch <<a>JohannesKirch@gmx.de</a>> wrote:<br /> </div>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px">
<div>
<div style="font-family: Verdana; font-size: 12.0px;">
<div>Hey there everybody,</div>
<div> </div>
<div>I am trying to build a energy hybrid system for my dissertation in TRNSYS. There are a photovoltaics system and a cogeneration system linked with a battery storage. The photovoltaics system is working. For the CHP I am using TYPE 907 and some heat exchangers and thermal storage tank for the heating part. But the IC Engine is not working. I tried some real electrical load profiles and linked them in TYPE 9c with the engine as "desired output power". But there is still no power to see in the output and no increase of the temperatures of the coolants. So how can I get this engine working?</div>
<div>I am not sure where are my mistakes. Is there an example availible to get a better comprehension of TYPE 907 in combination as CHP?</div>
<div> </div>
<div>Kind regards,</div>
<div>Johannes Kirch</div>
<div> </div>
<div> </div>
<div> </div>
</div>
</div>
</blockquote>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px">
<div><span>_______________________________________________</span><br /><span>TRNSYS-users mailing list</span><br /><span><a>TRNSYS-users@lists.onebuilding.org</a></span><br /><span><a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a></span></div>
</blockquote>
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org <a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a></div>
</div>
</div>
</div>
</div>
</div>
<!-- html ignored --><br />
<pre>_______________________________________________
TRNSYS-users mailing list
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
</body></html>