<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
<html><body>
<p>Without detailed measured data, or a CFD study of the tank in question, I would set the inversion flow rate input to -100, signifying that the inversions should be eliminated thoroughly at the end of each timestep.</p>
<p> </p>
<p>Jeff </p>
<p> </p>
<div>
<pre>---<br />Jeff Thornton
President - TESS LLC
22 N. Carroll Street, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
</pre>
</div>
<p>On 05/20/2015 11:25 am, Anas Majdouli wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px"><!-- html ignored --><!-- head ignored --><!-- meta ignored -->
<div dir="ltr">Hi TRNsys community,<br /><br />I am working on a DHW simulation using Type 534. The file is attached to this email.<br />I would like to know how to choose a value for "Inversion Mixing Flowrate", which is an input for Type 534. <br />I randomly chose 100 kg/hr, but I would like to know how to calculate this flowrate or how to choose it.<br /><br />Thanks in advance.<br /><br />Yours Sincerely,<br />Anas MAJDOULI</div>
<!-- html ignored --><br />
<pre>_______________________________________________
TRNSYS-users mailing list
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
</body></html>