<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>Hi TRNsys community, <br><br>I hope you are doing very well.<br><br>For
TRNsys simulations, usually when we are using types, density and/or
Fluid Specific Heat are among the parameters to specify. The problem is
sometimes, these parameters vary and depend on temperature, pression... <br><br>So I looked for a polynomial equation that gives for example density=f(Temperature) and I found one [formula 1 in <a href="http://metgen.pagesperso-orange.fr/metrologiefr19.htm%5d." target="_blank">http://metgen.pagesperso-orange.fr/metrologiefr19.htm].</a>
My question is : how to introduce this formula in TRNsys so that this
latter will use it automatically ? I don't want to create an
'Assembly/Insert new equation' component each time...<br><br>Thank you in advance,<br><br>Anas MAJDOULI </div></body>
</html>