<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Nguyen,<br>
Look at the ground temperature and other boundary temperature
inputs to Type56. If they are not connected from the outputs of
other components and have an initial value of 0 then that would
explain why the temperature in your building is unrealistically low.
If you are not able to determine the cause of the low temperature
then you should send your project (*.tpf and *.b17) to your
distributor for assistance.<br>
Kind regards,<br>
David<br>
<br>
<br>
<div class="moz-cite-prefix">On 11/5/2014 08:33, Tung Nguyen Huy
wrote:<br>
</div>
<blockquote
cite="mid:CAHaW-e=k324z6UdeG3dzQ3pXNgjh28zP0fxqnube-QJDz9yTgQ@mail.gmail.com"
type="cite">
<div dir="ltr">Dear <span
id="b4698df0-568e-452b-a86d-fbbdc799ac96"
class="GINGER_SOFTWARE_mark">alls</span>,
<div><br>
</div>
<div>I'm running the simulation for a terraced building. After
setting all the parameters, I run the simulation.
Unfortunately, my results are very bad. The relative humidity
is nearly 100% and the indoor temperature is lower than the
outdoor temperature. I tried to increase the ventilation up to
15 ACH per hour, but it seems not much change. I also changed
the capacitance humidity model to 10 (for typical room) but it
doesn't improve much.</div>
<div><br>
</div>
<div>Is there anyone facing the same problems with me. Please
share and help me deal with this.</div>
<div><br>
</div>
<div>Thank you so much!!!!</div>
<div><br>
</div>
<div>Best <span id="d0b7731c-2ae0-4983-a984-26507378d0ee"
class="GINGER_SOFTWARE_mark">regrads</span>,<br clear="all">
<div><br>
</div>
-- <br>
<div class="gmail_signature">
<div dir="ltr">Nguyen Huy TUNG
<div><br>
</div>
<div>-----------------------------</div>
<div>Lecturer in Civil Engineering Department</div>
<div>Construction Technical College number 1</div>
<div>Trung Van, Tu Liem, Ha Noi, Vietnam</div>
<div>Mobile: +84.934.353.344</div>
<div><br>
</div>
</div>
</div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
TRNSYS-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
<a class="moz-txt-link-abbreviated" href="mailto:d.bradley@tess-inc.com">d.bradley@tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.tess-inc.com">http://www.tess-inc.com</a>
<a class="moz-txt-link-freetext" href="http://www.trnsys.com">http://www.trnsys.com</a></pre>
</body>
</html>