<div dir="ltr">Dear <span id="b4698df0-568e-452b-a86d-fbbdc799ac96" class="GINGER_SOFTWARE_mark">alls</span>,<div><br></div><div>I'm running the simulation for a terraced building. After setting all the parameters, I run the simulation. Unfortunately, my results are very bad. The relative humidity is nearly 100% and the indoor temperature is lower than the outdoor temperature. I tried to increase the ventilation up to 15 ACH per hour, but it seems not much change. I also changed the capacitance humidity model to 10 (for typical room) but it doesn't improve much.</div><div><br></div><div>Is there anyone facing the same problems with me. Please share and help me deal with this.</div><div><br></div><div>Thank you so much!!!!</div><div><br></div><div>Best <span id="d0b7731c-2ae0-4983-a984-26507378d0ee" class="GINGER_SOFTWARE_mark">regrads</span>,<br clear="all"><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr">Nguyen Huy TUNG<div><br></div><div>-----------------------------</div><div>Lecturer in Civil Engineering Department</div><div>Construction Technical College number 1</div><div>Trung Van, Tu Liem, Ha Noi, Vietnam</div><div>Mobile: +84.934.353.344</div><div><br></div></div></div>
</div></div>