<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
<html><body>
<p>Giuseppe,</p>
<p> I am not sure what you mean by your first question. As far as your second question is concerned though I think you only need to change the simulation time step. Note that you will leave the data interval unchanged in Type9 (the data interval stays 1 hour). I am not sure that I would set the simulation time step lower than about 1 minute however. The algorithms that interpolate solar radiation data are appropriate for timesteps between about 1 minute and 1 hour but they do an increasingly poor job of predicting the split between beam and diffuse radiation at timesteps less than one minute.</p>
<p>Kind regards,</p>
<p> David</p>
<p> </p>
<p> </p>
<div> </div>
<p>On 2014-06-27 09:41, Giuseppe Filippini wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2px solid; margin-left:5px">
<div dir="ltr">
<pre style="white-space: pre-wrap; color: #000000;">Dear TRNSYS-users,</pre>
<pre style="white-space: pre-wrap; color: #000000;">I simulated my model with TYPE 71,3,4,9,15 and plotter Type 65 (more information in attachement);</pre>
<pre style="white-space: pre-wrap; color: #000000;">My time simulation consists in:</pre>
<pre style="white-space: pre-wrap; color: #000000;">TIME STOP: 24hr</pre>
<pre style="white-space: pre-wrap; color: #000000;">TIME STEP: 1hr</pre>
<pre style="white-space: pre-wrap; color: #000000;">And my data reader type 9e reads 24 values of Total Radiation (as a particular day with 24 hr of continuity total radiation) ;</pre>
<pre style="white-space: pre-wrap; color: #000000;">so my problems are:</pre>
<pre style="white-space: pre-wrap; color: #000000;">1. How can I obtain inlet/outlet temperature (in a plotter) from the collector, without the difference between daytime and nighttime of the collector?</pre>
<pre style="white-space: pre-wrap; color: #000000;">2. How can I write "Total Radiation data file" in a component to read them in seconds (and not in hours) by the collector TYPE 71?</pre>
<pre style="white-space: pre-wrap; color: #000000;">Best regards.</pre>
<pre style="white-space: pre-wrap; color: #000000;">Giuseppe</pre>
</div>
<br />
<pre>_______________________________________________
TRNSYS-users mailing list
<a href="mailto:TRNSYS-users@lists.onebuilding.org">TRNSYS-users@lists.onebuilding.org</a>
<a href="http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org</a>
</pre>
</blockquote>
</body></html>