<div dir="ltr">Hi ,<div><br></div><div>I get some strange result i.e I can not find logic in it: I use tank Type 60c only heated by standard solar collector installation. I use the differential controller(monitoring temp.) to limit the tank top temperature to 60C and I'm also using tempering valve Type 953 with diverting and three-wat valves for controling the outlet temp. In the simulation I get temperatures at the outlet of the three-way valve (after mixing) higher than 60C (even 80-90C) how is it possible?</div>
<div><br></div><div>When I model the HX in Type60c with glycol solution I get convergence problems and with water there is no problem...?</div><div><br></div><div>Thank you</div><div><br></div><div>Regards</div><div>Barto</div>
</div>