<div dir="ltr"><br><div class="gmail_quote"><br><div dir="ltr"><div><div>Hi everybody,<br><br></div>I am working on Borehole Thermal Energy Storage using type 557a and 557b. I am using DST as well and I don´t understand why the storage extraction temperature is always below the storage average temperature while in DST is the opposite.<br>
<br></div>I calculated the optimum design for a thermal storage to supply District Heating with DST, in TRNSYS I simulated the LOAD with a heat exchanger and a pump pumping at 20-25 degrees, but I cannot get the same results, not even close. <br>
<div><div><div><div><br><br>Please contact me if some of you did some simulation with large thermal underground storage with TRNSYS (type557).<br><div><div><i><a href="mailto:jovejm@gmail.com" target="_blank">jovejm@gmail.com</a></i><div>
<div dir="ltr"><div>---<br>Jordi Jové <br></div><i><a href="mailto:jovejm@gmail.com" target="_blank">jovejm@gmail.com</a></i><br></div></div>
</div></div></div></div></div></div></div>
</div><br></div>