<div dir="ltr">Dear all,<div><br></div><div>I got some problems while running building simulation. I run a 90-square meter apartment in the 5th story. However the results look so strange.</div><div><br></div><div>1. The outdoor temperature that is from the field measurement isn't shown as the input file.</div>
<div>2. The temperatures in all zones  don't parallel fluctuate with outdoor temperature. The longwave <span id="6416bddd-6bb3-48a0-9f3d-3b65c81e4bfe" class="GINGER_SOFTWARE_mark">of</span> <span id="6c41526b-306d-4645-932c-0457732157ae" class="GINGER_SOFTWARE_mark">zones'</span> temperature is much smaller than the outdoor temperature. Additionally, the <span id="f9e7971d-ff52-4a18-998b-0d5496b38016" class="GINGER_SOFTWARE_mark">zones'</span> temperature <span id="6700d488-8baa-402c-b8bc-28f9d8a8c01c" class="GINGER_SOFTWARE_mark">don't have</span> any peak while the outdoor temperature has <span id="0cfcc5d7-e4fa-4696-974c-88f56e13027f" class="GINGER_SOFTWARE_mark">peaks</span> within every day. </div>
<div><br></div><div>Thank you so much for your kindness.</div><div><br></div><div>Sincerely,</div><div>Nguyen, Huy Tung</div></div>