<div dir="ltr">Hi Trnsys users,<div>I had attached a Simple thermostat to a building and my puprpose is to controls the signal of fan coil unit. I am taking 23.5 deg C as a setpoint and deadband of 1 deg C. In the start of the simulation it works properly but in between of simulation it is not working.</div>
<div>I am attaching an excel file of results which shows room air temperature and fan coil unit signal. So, please help me out.</div><div><br></div><div>Thanks for any help in this regard.<br><div><br clear="all"><div><br>
</div>-- <br><div dir="ltr">With regards,<div>Abhay Pratap Singh</div><div>MNIT, Jaipur</div></div>
</div></div></div>